EASY GATES (Feb. 9, 2016)

ABOUT FENCE!

I must be living right. I have friends who know how to do things I can’t do and tools and materials to make things happen (in the right season).

Brit, PieFace and Shotzee in Tiger Fountain Garden behind cattle panel gate.
This gate has 2" x 4" fencing so cats can't go through it,
and a fence post scrap on the edge to stiffen it so determined dogs can't bend it out and squeeze through.

The Gate

Our ‘quick’ solution to the gate dilemma is using sections from 52” tall, 16 ft. cattle panels made from 4 gage (3/16”) steel wire on a 6” h. x 8” w. grid. They stand up to any animal and are infinitely reusable. You do have to use a long bolt cutter or a saw to cut them. I lay the panel on the ground, set one arm of the bolt cutter on the ground and push down to cut it.   Gate widths should stay in the 8” or 6” module. I have screwed wood strips together to cover the pointy ends but that adds weight to the gate so it sags and slides off if you don’t watch out. We add 2”x4” welded wire fencing to the gates for cat excluders.

I got back to the project a few days later; finished packing the posts which were already quite stable.  I 'tacked'  deck screws to both gate posts to line up and hold up the gate before I added the hinges and catch. For hinges I folded a two hole pipe strap so the holes lined up (in a vice), slid it over the outside panel wire (the hinge 'pin') and deck screwed it in place using my battery screw gun. This gate is a little bent so the middle hinge is an opened strap for more wiggle room.









I took out the tack - screw on the catch side to test the hinge and see where the gate would land before screwing the catch in place. I made sure it swings shut and latches on its own. That was it for the day so I propped the gate open so nobody would run into it while the dog racing track was open.

ABOUT FENCE! MOVING POSTS (Feb. 7, 2016)

I must be living right. I have friends who know how to do things I can’t do and tools and materials to make things happen (in the right season).

The Tiger Fountain Garden gate posts were all wrong and a holly was in the fence line so I brought in my friend Wendell Yoakum the genius gardener.  

Post packer label should stop folks
from throwing out the warped 6 ft. board.
(Fence stretcher board is on the right.)  

The bend in the post packer helps
keep knuckles away from the post.
Small enough to fit in the hole and
 big enough to compact the soil, it's
a 5/4" x 2 1/2"deck board strip.

The gate hinge side already had a post, but it was too skinny. A big post nearby was redundant; two posts to move. I’d Googled ’pull up wooden posts’ and watched demos on YouTube.  They fastened things to the side of posts and used a fulcrum or jack to lift them. Wendell simply dug a post hole (clamshell digger) next to the post, wiggled it, and pulled it out!  Then we had an object lesson on the water table as water filled the bottom foot of the hole in less than a minute. We didn’t need a crystal ball to tell us things were about to get messy. That water wasn’t going to stay in the bottom of the hole when he deepened the hole and then packed the new post. There was gravel in the bottom from the first time we set the post.  Wendell set that aside to put back in first. When the hole was more than 3 ft deep (for the 9ft. post) he added gravel, put the big post in, added a little more gravel/mud and packed it with my official post packer stick, repeating until about six inches from the top of the hole. He stopped there to let it dry out a day or two before topping it off.  We’ve learned that if you don’t pack it in small layers or mound it up when wet, a post can be wiggly forever. 

The skinny post he’d removed was rotten at the bottom and too short to use for the gate now. We went on a post hunt in the fruit orchard and chose one that used to support a long gone grape vine. (Mowing the orchard just got easier!)  

We’d set the first post so the center of the gate lined up with the garden focal point, ‘Tiger Fountain’ and the solarium doors to the north, and the other posts to the west (no tapes measures, just eyeball’d it). We held the gate next to it’s post where the hinges would be, lined up the new post with enough room for the catch to meet the gate, marked the spot, then dug the hole and planted that post too. To our surprise, we found grey gravel in the bottom of the new hole. Must’ve had another post in that spot before; North GA granite doesn’t migrate on it’s own.  

Before calling it a day, Wendell dug up the holly, took it to the garden and covered the roots with compost to hold it a few days until I decided where to plant it. I don’t have to hurry because this is winter and the plant is dormant.

ABOUT FENCE! JUST DIGGIN' IT.

ABOUT FENCE!

I must be living right. I have friends who know how to do things I can’t do and tools and materials to make things happen (in the right season).

Just Diggin' it.

The clamshell digger (2ft. depth marker) has black topsoil.
The auger (3 ft. marker) has red clay subsoil on it.
Not shown, plywood scrap to slam the shovel onto to get the dirt off and make it easier to rake or hoe the dirt back into the hole. Use 2 to keep subsoil separate from topsoil.

30 years ago we began fencing Daddy’s lot in Parrott, as soon as we got dairy goats.  We began with a barn (shed roof apron around the old garage) and three 25 ft. x 25 ft. pens where we rotated goats and gardens.  The fencing had to be 6 ft. tall to keep goats in and predators out. 6 ft. fence, posts 1/3 in the ground = 9 ft. posts in 3 1/2  ft. deep holes with room for gravel at the bottom.  You can get most of the way down with a clamshell post digger and then have to switch to an auger because there's not enough room in a deep hole to pull the handles apart with a decent load of dirt. Bond got his workout putting in that first goat pen. We had cross braces in every corner, 28 holes or 98 running feet! Eventually we fenced in the south acre pasture, after we bought a one-person gas powered hole digger in a frame, that even I could use.

Time to Plant Posts 

We began fencing in winter. As the days grew warmer the ground got harder. Our neighbor, Frank Alston remarked, “Everybody knows there’s a time to plant and a time to harvest.  Around here there’s a time to plant posts. That’s wintertime. In summer this clay is hard as concrete; you may as well give up and wait for winter.”  I got around that with a single drip irrigation emitter on each spot for a day before digging. That way the water went straight down to soften the soil.

The goats are long gone.  The fences keep dogs, cats and gardens separated.